Digital Solder Glue Dispenser 982A

Specifications:

• Power: AC 110V ± 10% / 50Hz
• Power consumption : <8W
• Air source: Maximum 0.99MPa (clean dry air without lubrication)
• Pressure adjustment range : 0.05MPa-0.99MPa
• Time adjustment range : 0.01S--30S, the time available to a variety of modes
• Function Mode : Manual mode / automatic mode
• Vacuum features : adjustable negative pressure control to 600 mm Hg
• Repeatability and spit Frequency: Accuracy : ± 0.05% Frequency: 600 beats / min
• Minimum discharge rate : 0.01ml
• Dimensions : 235mm x 225mm x 60mm
• Weight : 2.2kg

Operating modes:

• Automatic operation (auto) ( applicable to quantitative , non-timed dispensing )
• The switch to automatic auto position.Adjust the pressure and volume of the plastic , choose the right needles can control the flow of liquid material correctly.
• Every step on a foot switch, the liquid material will be in accordance with the glue set automatically drop out from the needle hole.
• Hand-operated (manual) (applicable to non-quantitative , non-timed dispensing )
  
• The switch to the manual position.Adjust the air pressure and select the appropriate needles .Depress the foot switch, the liquid material will drip from the needle hole , release the foot switch to stop the liquid material drops out.

Packages included:

• 1 x Dispenser main unit
• 1 x Manually switch
• 1 x Foot switch
• 1 x Air tube
• 1 x Power line
• 1 x Dispenser stand
• 2 x 30CC connectors
• 3 x 30CC Liquid Barrels
• 5 x Steel needles
• 4 x Plastic needles