Dispensing Syringe Variant

1) Dispensing Syringe 300 ml

What it is: Extra-large, single-use syringe for bulk fluid transfer and controlled dispensing on the bench.
Highlights:

• Clear, graduated barrel for easy reading

• Smooth plunger for steady flow

• Luer tip (Lock/Slip by model) for tubing or blunt tips

• Ideal for refilling reservoirs, potting, or solvent transfer

2) Dispensing Syringe Eccentric Tip 20 ml

What it is: 20 ml syringe with an offset (eccentric) Luer tip for near-flush work along flat surfaces.
Highlights:

• Off-center outlet reduces dead space and improves access

• Clear graduations; low-friction plunger

• Connects to standard Luer needles/blunt tips/tubing

• Sterile, single use

3) Dispensing Syringe Glass 5 ml

What it is: Borosilicate glass syringe for high-precision dosing and solvent compatibility.
Highlights:

• Chemical and thermal resistance superior to plastic

• Fine, easy-read scale for accurate micro-dispensing

• Luer (or ground glass, model dependent) connection

• Reusable with proper cleaning; lab and analytical use

4) Dispensing Syringe Glue 30 cc

What it is: Industrial 30 cc dispensing syringe barrel for adhesives (CA/epoxy/UV), flux, oils, etc.
Highlights:

• Female Luer Lock hub fits standard dispensing tips

• Works with benchtop pneumatic controllers or manual plungers

• Translucent barrel for level check; matched piston available

• Consistent dots and beads for production use

5) Dispensing Syringe Hydrophobic PTFE Labfil 25 mm × 0.45 μm

What it is: Syringe filter with hydrophobic PTFE membrane, 25 mm diameter, 0.45 μm pore size.
Highlights:

• Excellent chemical resistance; ideal for aggressive solvents

• Hydrophobic membrane—great for gas/venting and solvent filtration (not for aqueous unless pre-wet)

• Luer-Lock/Luer-Slip compatible inlet/outlet

• Low extractables; clean filtrates for lab and process

6) Dispensing Syringe Middle Tip 20 ml

What it is: 20 ml syringe with center (standard) Luer tip for general dispensing.
Highlights:

• Central outlet for balanced push force and alignment

• Clear, graduated barrel; smooth plunger

• Fits Luer needles, blunt tips, and tubing

• Sterile, non-toxic, non-pyrogenic (single use)

7) Dispensing Syringe Oiler 60 ml (TP-60)

What it is: Precision oiler bottle with 60 ml capacity for applying lubricants and light oils.
Highlights:

• Fine nozzle for controlled drops or thin beads

• Squeezable body for one-hand metering

• Useful for hinges, tools, linear rails, and small mechanisms

• Transparent body to monitor fill level